Now shipping with V2 arms!
Sexiest Drone Around!!!
Race or Freestyle!!!!!!!!!
Taking drone design to the next level! The combination of aircraft grade aluminum and carbon fiber not only makes this frame super fancy but also really strong! The frame has 4mm arms and 1.5mm side plates.
LIGHT & REALLY STRONG
A combination of carbon plus aluminum and the fact you can easily swap arms make sure you get as much flight time (and crashes) as possible.
Bare frame weight is 94 grams
PDB / BOTTOM PLATE
A very simple PDB with ESC +/- connections has been designed to make for very clean builds.
A second carbon bottomplate is also included in case a PDB is not needed.
WELL PROTECTED FPV CAMERA
The aluminum brackets form a very strong rollcage which protect all important hardware.
The carbon sideplates have a series of holes so you can mount and adjust the FPV camera (optimized for HS1190)
A 30 and 40 degrees Gopro Session mount .stl file is availabe for download which can be 3D printed and mounted to the frame with use of the supplied spacers and bolts. No strap is needed.
A 2mm thick vtx antenna mounting plate is supplied which angles your antenna at exactly 45 degrees which is optimal for signal strength as well as crash resistancy.
Dquad also designed a custom 3D printed part to protect your XT60 connector from being ripped off in a hard crash
Specs & What's in the Box
- 210mm size 5” frame
- Frame weight 94 / 95 gram
- 4x 4mm carbon arms
- 2x 1.5mm Carbon bottom/top plate
- 1x 1.6mm PDB
- 2x 1.5mm FPV side plate
- 2x 7075 Aircraft Aluminium roll cage Bracket
- 1x 2mm VTX antenna mount
- 1x 3D designed XT60 connector holder
- 1x Fastener kit incl: bolts, nuts and spacers
- 1x Battery strap
- 2x sticker
- 1x Manual QR code card.
- Model: DQ-OB-210
- Shipping Weight: 0.22